搜索
Search
img
Master the essentials of operation and extend the service life of the equipment

Master the essentials of operation and extend the service life of the equipment

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-02-26 16:32
  • Views:

(Summary description)Ensure that the feed to the roller crusher is uniform and continuous. When crushing the material, it should be evenly added into the crushing cavity. Side feeding or stacking feeding should be avoided to prevent unilateral overload or overload.

Master the essentials of operation and extend the service life of the equipment

(Summary description)Ensure that the feed to the roller crusher is uniform and continuous. When crushing the material, it should be evenly added into the crushing cavity. Side feeding or stacking feeding should be avoided to prevent unilateral overload or overload.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2020-02-26 16:32
  • Views:
Information

1. Ensure that the feed to the roller crusher is uniform and continuous. When crushing the material, it should be evenly added into the crushing cavity. Side feeding or stacking feeding should be avoided to prevent unilateral overload or overload.

2. Turn on the material first, then stop feeding. That is, the feeding of the roller crusher can only be started after the normal operation; before the roller crusher stops, the feeding work should be stopped first, and the motor can be turned off after the crushed material in the crushing cavity is completely discharged.

3. During crushing, if the stoppage is caused by the material in the crushing chamber, the motor should be turned off immediately, and the material must be cleared before restarting.

4. Under normal circumstances, the temperature rise of the roller crusher bearing does not exceed 35 ° C, and the maximum temperature does not exceed 70 ° C. If it exceeds 70 ° C, it should be stopped immediately to find out the cause and eliminate it.

5. After one end of the tooth plate is worn, the adjustable head can be used.

6. During the use of the roller crusher, it is necessary to avoid water entering the crusher as much as possible, which will cause the rust and increase the wear and tear, and the roller will not wear. This measure can effectively extend the life of the machine. When not in use, be sure to cover it with something to prevent oxidation from rain or water vapor in the air.

Scan the QR code to read on your phone

icon icon

Copyright © 2020 SHENGYANG SHANAN MINING EQUIPMENT CO.,LTD All rights reserved.